| Textile Engraving Chemical Of
Rotary Printing
 |
endring adhesive is used for gluing end-rings to and engraved screen.
Properties: It is a two component adhesive (Resin + Hardener).
Direction For Use: Take 1 kg resin and 0.8 kg hardener, mix it thoroughly.
After mixing apply with spatula onto both endring and screen, with are scoured over approx. 2 cm. After insertion of endring drying time. 200C - 10hrs, 700C - 2 hrs, 1200C (max) - 15 min.
|
Storage: Cool and Dry
Packing: Resin : 1 kg. Hardener : 0.8 kg. 1.800 kgs/set
|
