|
Flat Bed Coating Exposing Chemicals for Textile Prosses & Printing Mills
 |
Marktex-600 has been specially
developed for the economical engraving of Textile Printing Screens by the direct method. It does not require reinforcing
with lacquers the chemical curing process enables extremely
fine detail to be reproduced.
Prorerties
Medium viscosity very light sensitive exceptionally sharp
image reproduction high elasticity and excellent resistance to
all sorts of printing pastes normally used in textile printing
and suitable for both polyester/nylon or stainless steel
meshes.
|
APPLICATION
| 1 |
Proportionately sensitizer
1.000 g Marktex-600 with 50 gm. Marktex Sensitizer |
| 2 |
Clean and degrease the
screen fabric thoroughly and let it dry. |
| 3 |
The following methods of
coating yield high-quality results.
1. Coat the screen once on the outside and dry.
Thereafter apply an extra coat on the inside and dry yet
again.
2. Coat the screen once on the outside and once on the
inside wet on wet and let it dry |
| 4 |
For both methods of coating
, dry in a horizontal position in a dark room at a
maximum temperature of 40’C. |
| 5 |
The exposure time depends
not only on the light source but also on the coating
thickness. The mesh count of the screen and the distance
of screens from the light source. |
| 6 |
Develop in a water bath by
immersing the screen in bath for about 5- 10 minutes.
water spray may be used for obtaining cleaner image.
Rinse with water thoroughly. |
Shelf Life: 12 months, if container is properly
closed.
Packing: 10 & 30 kg carboys SENSITIZER supplied
with emulsion in 500 gms.
Flat Bed Coating Exposing Chemicals Photoemulsion Textile Prosses & Printing Mills Photoemulsion MarkTex-600 Photoemulsion.
|
